You are currently browsing the US Forklift Certification blog archives for September, 2012

Washington Forklift Training: Seattle and Surrounding Area

OSHA requires your Seattle forklift certification to be renewed every three years. Whether you’re renewing or getting it for the first time, we can help. In one to two hours, you can have this process completed for just $38. The good news is that it doesn’t matter which Washington city you live in; the process and the credentials are the same. In fact, our certification is valid is all US states, Canada, and Mexico.

Once you enroll in our online class, you will received immediate access to all of your materials. You can do your studies at your pace, and take the test when you’re ready. We offer a practice test that you can take at your leisure, which will give you a good feel for what the test is going to be like.

Online learning has proven to be a useful resource for many who have busy lives filled with busy schedules. You can complete your education in the comfort of your own home while you are cooking dinner or sitting on the couch. Everything that you are required to know for forklift certification in Seattle is all packed into one quick course.

You will not have to worry about whether you are in Washington on the Pacific coast or New York on the Atlantic coast; you will receive all of the training you need in order to pass.

Minnesota Forklift Certification

So you have decided to look into the guidelines for forklift certification for Minnesota. That is good news since the North Star State is thriving in the agricultural industry. You may be wondering what that means for you. If you haven’t heard, the forklift industry is looking for qualified people who have the skills necessary to operate a lift in not only the warehouse industry, but also in the shipyard and agricultural setting. So this means that securing for a job in the Gopher State should be relatively easy.

Another piece of good news is that you can get the training you need quickly by visiting our site and registering with us today. The process is easy and affordable. With a low price of $38, we’ve made it easy for you to achieve your goals online. Unlike other industries that requires years of education (which comes with a nice big student loan), this industry only requires a quick training course. Many of our students have reported that they were able to complete our entire online course in as little as 60 minutes.

Once you become certified, you will have to renew every three years, which can also be done through our website. Once you become familiar with our easy-to-understand lessons and testing process, you will find it that much easier the second time around for renewal.

If this seems like something that you are ready to do, then don’t hesitate to visit us at to get started today. An affordable $38 can begin to open new doors for you and your career.

What is a Forklift Truck?

These trucks go by several names including forklift, fork truck and lift truck. They are used to lift and move large loads. They are used in many industries such as distribution centers, warehouses, lumber yards, grocery stores, home improvement stores and recycling facilities. This machinery has been around since 1917 and have been refined through the years to the essential piece of equipment we have today. There are several types to meet various weight limits and customer needs. Most work in a specific application but some can be multiple use.

The prongs, or tines, jutting out of the front are a crucial element to the device. You use the prongs by inserting them under your material and raising it above the ground. Once you have properly lifted and secured your load, it can safely be relocated. By carefully using the machine’s controls, you can then lower and release the materials.

Trucks are categorized in eight classes by the Industrial Truck Association:

Class I – Electric motor rider truck

Class II – Electric motor narrow aisle truck

Class III – Electric motor hand truck

Class IV – Internal combustion truck, cushion tires

Class V – Internal combustion truck, pneumatic tires

Class VI – Electric and internal combustion tractor

Class VII – Rough terrain forklift truck

Class VIII – Hand pallet truck

Electric varieties are powered by batteries that require frequent charging. They cost less to operate than those that are gas powered and they are much quieter. These types of lifts are normally used indoors where there isn’t much ventilation. They can lift up to about 15,000 pounds.

Internal combustion varieties are fueled by gasoline, diesel fuel, liquid propane or compressed natural gas. These are normally used outside due to the fumes from the fuel. They can lift anywhere from about 15,000 – 35,000 pounds.

Manual varieties mainly consist of a handle for pushing and steering and have adjustable blades and a pressure pump for raising and lowering the blades. These are primarily used for lifting only a few inches off the ground. They are used in many grocery stores and can lift up to about 5,000 pounds.




How To Do Load Testing on a Forklift

Load testing your unit is required by OSHA each year and after major repairs in order to avoid unnecessary accidents, injuries, and deaths. There are certain steps that should be followed before beginning load testing.

  1. The first thing you should do is test the brakes without a load and limiting safety equipment and features. This will help determine if the mechanisms are working properly and minimize the risk of tipping over.
  2. Gather test weights matching the maximum rated load specification as indicated in the operations manual. Weigh the test load to be lifted to ensure the accuracy to be within minus five percent of rated capacity.
  3. Load the test weights and ensure the slippage isn’t more than three inches vertically and one inch horizontally. You should raise the load to maximum for a minimum of 10 minutes to ensure the vehicle doesn’t lower or drop the load.
  4. If it fails the load test, require the maintenance needed and perform the test again.
  5. Once you have successfully completed the test load, you should write a report stating steps used.

Following these steps will put you on the road to safe driving and accident prevention.

New Jersey Forklift Certification

There are many places in New Jersey and the surrounding areas where you can find employment as a forklift operator. But before you start looking to secure a job, it’s important for you to be aware that you are required to go through a certification process before you can operate the vehicle. Failing to do so can lead to up to $10,000 in fines for you or your employer.

This sounds pretty serious, but in reality it’s fairly easy to get certified. More than anything, OSHA just wants to make sure you know what you’re doing before you get to the controls. This will help to avoid unnecessary accidents and injuries.

Also, your forklift credentials are not actually state-specific. This means that even if you get your license in New Jersey, it will still carry over across state lines. You are able to work anywhere in the US, Mexico, or Canada with the same certificate. However, you do need to renew every 3 years.

Some employers will provide the training for you, but you don’t have to wait to find out. If you’re over 18, you can sign up for our online course, which will take you through the whole process in just a couple hours. It’s not expensive (just $38), and the benefits are many. If nothing else, you will be able to show your potential employer that you took the initiative to get it out of the way so that there will be one less hurdle to overcome before you can start working.

OSHA Forklift Training Requirements

The Occupational Health and Safety Administration is responsible for ensuring there are proper regulations on safety in the workplace. This is no exception when it comes to the proper ways to safely operate a forklift. In fact, OSHA reports that there are about 85 deaths a year that are the result of these kinds of accidents.

That’s why the Administration now requires that certain safety precautions be taken, including a safety training program for all operators. Failure to comply could result in thousands of dollars in fines.

The required training should include topics like how to safely operate the vehicle on different surfaces, how to properly load and unload the fork, and what to do in the event that the vehicle tips over, just to name a few.

There is no universal test that needs to passed, as OSHA does not directly sponsor or administer any course. The main thing is to ensure that the certification process has been completed using a thorough course, and that all on-site operators have current credentials. The license is good for three years, and can be carried from state-t0-state; it’s good nationwide.

For more answers to our frequently asked questions, visit us at